Re: Fixing Hood Mount Nuts

[Wedge426@xxxxxxx]

Donny,

The same thing happened on my 64 Savoy. It was really a simple fix.

Get a longer bolt with the same thread, and run the nut on it by several 
threads. The nut will have the points where is WAS welded to the hood on it and 
will fit back where it's supposed to. Pull the nut and bolt tight, and tack it 
back in place, take the bolt out and weld it good, then grind it smooth. Sand 
it down, prime and repaint.

Think the whole operation took me about 45 minutes.

Rich StLouisMo
64 MaxWedgeSavoy


**************************************
 See what's free at 
http://www.aol.com.

--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.