From: Butch Edison <waedison1@xxxxxxxxxxx>
Reply-To: 1962to1965mopars@xxxxxxxxxx
To: 1962to1965mopars@xxxxxxxxxx
Subject: "Sport Fury " trim piece on trunk: how to remove and replace?
Date: Fri, 2 Nov 2007 09:55:15 -0700
I hope that describes the piece I'm looking to replace on the trunk of my
64
Sport Fury. It's a one-piece chrome script "Sport Fury" trim piece. The one
on my car is broken, so I bought a repro. I thought I'd find something like
pressure nuts on the 4 pointed pieces that pass through the body, to hold
the trim piece on, but when I looked, it seems to just be a pressure fit
through the sheet metal.
So, my questions are: how to remove the old piece and how to install the
new
one? Do I just pry off the old one from the outside of the trunk, drive the
pins out from the inside with a punch, what? I'm figuring on covering the
new trim piece with some toweling and driving it home carefully with a soft
rubber mallet? Sound right?
Thanks/ Butch/ Ferndale, WA
----
Please address private mail -- mail of interest to only one person --
directly to that person. I.e., send parts/car transactions and
negotiations as well as other personal messages only to the intended
recipient, not to the Clubhouse public address. This practice will protect
your privacy, reduce the total volume of mail and fine tune the content
signal to Mopar topic. Thanks!
'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.