Alternator / A/C pulling mounting?

[Jim Altemose <jaltemoose@xxxxxxxxx>]

I'm embarrassed to ask this, but I'm pulling my hair out.  I have a 63
Polara with a 383 and A/C, which is disconnected.  To change my fuel
pump, I pulled my alternator and bracket, and also a single pulley on
a bracket that I assume is for my disconnected A/C.  I didn't take
pictures because I figured it must be totally obvious to anyone with
half a brain how it all goes back.  Guess I'm down to a quarter brain.
 I have three 2-inch bolts (1 inch threaded and 1 inch smooth) that I
thought were obviously for the alternator bracket, but they're too
long and I'm assuming they didn't spontaneously grow.  I have a single
shorter bolt that I thought was from the A/C pulley bracket.  Maybe I
or one of my kids misplaced a couple of bolts?  I suffer from CRS
(can't remember you-know-what), so I'm not sure where the A/C bracket
mounts and it's not obvious to me.  Do the A/C bracket and alternator
bracket share a couple of the same holes?

Does anyone have a picture or two?

As always, thanks.

- Jim
Jim Altemose, Long Island, NY
'63 Polara 500 (Max Wedge)
'63 Polara 500 (383)
'65 Belvedere I (Street Wedge)
'71 Bronco