Re: 383 oil pan gasket choices

["MO ( Steve Mick)" <micher@xxxxxxxxxxxxxxx>]

That rubber with steel core sounds like a dandy! I would use a thin coat of 
hi-temp red RTV silicone sealer--and flaten the bolthole 
"dimples"....................MO......sw  iowa
----- Original Message ----- 
From: "Butch Edison" <waedison@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Sunday, June 21, 2009 9:39 PM
Subject: 383 oil pan gasket choices


> I'll have the steering linkage off my car pretty soon and would like to 
> take the opportunity to change a leaking oil pan gasket. I see Summit 
> Racing sells at least two types, one is fiber, one is rubber with a steel 
> core. Appreciate any advice on choice. Also, does this gasket require a 
> sealer? Thanks/ Butch /Ferndale, WA
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.