Re: heads

[Harry Skalla <moweepea@xxxxxxxxxxx>]

The car came with a 426 street wedge and four barrel, now has a crossram on 
it, I was thinking that the previous owner, used the sw heads.  But you say 
they won't fit the crossram right?
----- Original Message ----- 
From: "Donnie Schanz Jr" <dcs426@xxxxxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Thursday, December 24, 2009 9:22 AM
Subject: Re: heads


> Yes, the ports are huge when compared to a 426 S.W. or a 440. If you have 
> an aftermarket intake or factory single four, you have 426 S.W. heads. 
> There are no other intakes except the factory crossram and a few Indy 
> pieces that fit.
>
> Donnie
> ----- Original Message ----- 
> From: "Donald Gallimore" <dongallimore@xxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxx>
> Sent: Thursday, December 24, 2009 12:05 PM
> Subject: Re: heads
>
>
>
> From Mopar Muscle:
>
> Max Wedge heads are easily identifiable by the lack of a heat cross-over 
> passage, large 1.88-inch exhaust valves, and very large ports. Casting 
> numbers for the Max Wedge heads end in either 286, 209, or 518
>
>
> Akron Don
>
> There are no heat riser ports on a max wedge head. The area between the 
> two center intake parts should have no openings.
>
> Then there's the casting number which is located in the valve springs 
> area. I'm sure there's a listing of head casting numbers somewhere on the 
> 62-65 website.
>
> Akron Don
>
>
>
>
> ________________________________
> From: Harry Skalla <moweepea@xxxxxxxxxxx>
> To: 1962 1965 <1962to1965mopars@xxxxxxxxxx>
> Sent: Thu, December 24, 2009 10:50:27 AM
> Subject: heads
>
>
> First of all Merry Christmas to all. I have a set of 426 heads on my car, 
> how do I tell if they are Max Wedge heads or street wedge heads? Without 
> taking them off.Thanks...Butch
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person. I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic. Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> --
> [Non-text portions of this message have been removed]
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person. I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic. Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and 
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
>
>
>
>
> ________________________________
>
> From: Donald Gallimore <dongallimore@xxxxxxx>
> To: 1962to1965mopars@xxxxxxxxxx
> Sent: Thu, December 24, 2009 11:39:30 AM
> Subject: Re: heads
>
> --
> [Non-text portions of this message have been removed]
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and 
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.