RE: Wiper arm info on my '63

[Paul Lennemann <pjlenn@xxxxxxxxx>]

Take the wiper arms off then turn the wipers on then off.  If everything 
is working correctly the wipers should "park".  They should then be in 
the right position to put the arms back on.

Paul L.
'63 Sport Fury
440/727
http://www.1962to1965mopar.ornocar.org/ml-lennemann63.html


Enzo Cremasco wrote:
> 
> Hi Guys 
> I have my ride 90% ('63 dodge "440") together 
> I installed wiper arms yesterday
> When i activate the switch  they head for the cowl area I'm fairly 
> certain that the motor and mechanism were put in properly ,as best i can 
> tell from the FSM--
> I checked the switch thinking I had a polarity problem - but it was OK 
> any help appreciated
> thanks
> Enzo


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.