ECU and Engine Miss Diagnosis

[Donald Gallimore <dongallimore@xxxxxxx>]

Last trip to the drag strip, I developed a miss around 2500 RPM and up.  Engine 
seemed like it was loading up but carb looked good - floats levels are right
and we changed nothing on the carb.  This may have been developing for weeks and 
finally showed up late in eliminations.

I'm going to replace the cap, rotor, reluctor and pick up in the distributor 
since they are relatively small cost items.  Question is there a way to test the 
ECU? 


Lastly, any ideas on what (else) to check to eliminate the miss?
 
Akron Don Gallimore