Re: Heater

[Donald Gallimore <dongallimore@xxxxxxx>]

I strongly recommend you go to the heater switch repair person on the 
63-65 vendor pages.  He did a great job with three different switches for me.  
He's located in Texas. 
 
 Contact: Anthony Powell, Dept. 62 to 65 Mopar, 1305 North Grant Drive, Sherman, 
TX 75092 Or e-mail aepowell3@xxxxxxxxxxx and tell Anthony you saw his ad here. 


Akron Don Gallimore



----- Original Message ----
> From: Jeff Adams <ledman_70@xxxxxxxxxxx>
> To: 1962to1965mopars@xxxxxxxxxx
> Sent: Tue, December 14, 2010 7:37:25 PM
> Subject: Heater
> 
> 
> Hey guys, I'm trying to get the heater switch in my 64 Polara working. 
> It's not switching vaccum controllers like it should. I replaced the 
> non-working original 4 port vaccum switch a few years ago with a new 5 
> port A/C switch and just cut the bottom button off. I don't know if the 
> problem is with the switch or something else. I can get hot air out the 
> defroster, but only cold air out the bottom. Am I correct in assuming 
> the A/C switch routing is the same as the non A/C switch internally, or 
> are they just not compatible? Does anyone have a working 4 button switch 
> they'd like to sell?
> 
> Jeff Adams
> 64 Polara
> 
> 
> ----
> Please address private mail -- mail of interest to only one person -- directly 
>to that person.  I.e., send parts/car transactions and negotiations as well as 
>other personal messages only to the intended recipient, not to the Clubhouse 
>public address. This practice will protect your privacy, reduce the total volume 
>of mail and fine tune the content signal to Mopar topic.  Thanks!
> 
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and 
>http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. ---------
> 
>