Re: 413
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 413




I thought a 413 .060 over was 426 cubes, and a 426 .060 over was 440 cubes. How can you use 440 pistons in a .060 over 413?
Jeff


From: GARY WILSON <MOPAR413@xxxxxxx>
Reply-To: 1962to1965mopars@xxxxxxxxxx
To: 1962to1965mopars@xxxxxxxxxx
Subject: Re: 413
Date: Sun, 14 Mar 2004 15:13:54 -0800


440 pistons stock will bring the 413 to 426. I have a 413 also and am planning on borning it 60 over so I can use the 440 pistons.
MOPAR413 (Gary) 64 Polora 500
----- Original Message -----
From: Gary Futrell<mailto:gary-futrell@xxxxxxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxx<mailto:1962to1965mopars@xxxxxxxxxx>
Sent: Sunday, March 14, 2004 12:56 PM
Subject: 413



I've got a rebuilt 1964 413 shortblock to install in my 64 Fury this summer. I wanted to put 452 heads on it, but after checking the piston height, I'm sure about it. I used a straight edge and feeler gage , the piston was about .085 down in the hole. Are these possible truck pistons? The 413 is bored out .030. Aren't the 413 pistons hard to find?
Any recommendations on pistons? Would 426 pistons be easier to find? ( block bored out .060)



Gary



-- [Non-text portions of this message have been removed]

----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!


'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html<http://www.1962to1965mopar.ornocar.org/mletiq.html>.




[Non-text portions of this message have been removed]

----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!


'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.



_________________________________________________________________
Fast. Reliable. Get MSN 9 Dial-up - 3 months for the price of 1! (Limited-time Offer) http://click.atdmt.com/AVE/go/onm00200361ave/direct/01/


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.


b7yoMz. 






Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.