RE: Engine swap questions.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Engine swap questions.



To use the trans with your 500's floor shifter you need to get the 
shifter cable for that application from Imperial Services.

The later model 727 trans will not accept a B&T so you'll need a new 
driveshaft that mates to the later model transmission and travels to the 
8.75.

Gary H.  


Andy Grow wrote:
> Anyone out there done a engine/transmission swap from a small block 318 
> Poly / 727 to a big block (383 or 440) w/ new model 727 in a B body car 
> (specifically a 64 Polara 500)?<snip>
 
More importantly, what problems may (WILL) I have with dropping a BB 
into the car, as far as mounting stuff goes?  I assume I'll need a 
shorter driveshaft...any other modifications that will need to be done? 
<snip>

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz. 








Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.