Ken

[Don Dulmage <big-d@xxxxxxxxxxxx>]

===========================================================
Empower your Team with Remote Access. GoToMyPC Pro 
provides your organization with instant remote access to 
email,files, applications and network resources in real 
time. FREE TRIAL:
caaccMSb7yoMza/ ExpertCity
===========================================================


Bone dry for the Felpro.
For the old steel head gaskets we give them a light spray of silver paint just prior to installtion (just a dusting) 
For both torque them in steps. Start at 55Ft Lbs then 65 then 70 and then recheck the 70 this completely eliminates gasket problems . Also ifheads have been milled a lot use washers under the head bolts. (if over .060 has been removed) Sometimes threads in the block are not quite deep enough and it is hard to tell if the bolt is tight or stuck . This eliminates the problem.
Don

[Non-text portions of this message have been removed]

===========================================================
Domains as low as $4.95! 
Limited Time! ICANN Accredited GoDaddy! 
caaccM5b7yoMzf/ GoDaddy
===========================================================

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.