Timing installing dist. problems.

[Steve <scstudio@xxxxxxxxxxx>]

***********************************************************
Apply now for a No-Annual-Fee Discover® Platinum Card 
0% Intro APR*, No Annual Fee, Up to 2% Cashback Bonus® 
award* Start Saving Today ? APPLY NOW! It's fast, easy and 
secure. 
caacf0Db7yoMza/ Discover Card
***********************************************************
I'm sort of new at this so I could use your help.
I have a dart slant six with a 225.

i have a problem with getting the timing right when installing the 
distributor. I can find TDC and line the rotor just ahead of the #1 
plug but when I clamp it down I don't have adjustment with the 
distributor to bring the timing to spec.

I've tried removing the dist. and changing the rotor slightly then 
reinstalling it. But the time jumps to far the other way,

Two questions, I'm I just moving the rotor too much and need to keep 
trying?
Or
Is there something else like the time chain worn out?

I removed the dist. because I dropped the small screw in it that holds 
the condenser.
I had a problem of not having enough adj. with the dist. before I 
removed it, but I was closer before then what I get now.

Thanks for your help
Steve

===========================================================
Buy Stocks and Index Funds for just $4 No Account or 
Investment Minimums and No Inactivity Fees Automatically 
invest weekly or monthly and build your future. 
caaccMMb7yoMzf/ Sharebuilder
===========================================================

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


b7yoMz.