Re: Flexplate problem!

[Joeydahook9@xxxxxxx]

-----------------------------------------------------------
Give Your Team Access to Their PCs from Anywhere. Increase 
productivity with a secure remote-access solution from 
GoToMyPC Pro. Stay in touch with your office. FREE TRIAL:
caaciqXb7yoMza/ExpertCity
-----------------------------------------------------------


  I just bought the same flex plate #P4529751  Supposed to have 7/16" holes 
to bolt to B&M or Turbo Action converters.  The t/c holes are about 1/8" in 
from the outside edge.  Hope this will work with a Dynamic converter. It's about 
10 3/4" diameter with 10" across the t/c bolts center to center.  At least I 
only paid 20.00  for it at a swap meet.  Never installed, but a September 2001 
SFI date.  I'd better call Dynamic to see if it will work before balancing it. 
  Thanks for the tip.  Joe

--
[Non-text portions of this message have been removed]

-----------------------------------------------------------
Let University of Phoenix make 2004 your year. Evening, 
weekend or FlexNet® classes ? over 130 locations. Look 
into our programs and get the degree that gets you going!
caaciq1b7yoMzf/UOP
-----------------------------------------------------------




----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.