RE: Exhaust Studs

[Brian Schlump <jsbs@xxxxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Do you live vicariously through Reality TV? Let us know and win!
caacDv1b7yoMza/PermissionData
-------------------------------------------------------------------

Yes Scott.  It's called a sleeve nut and it's available from Year One, 
and The Paddock.  There are 2 lengths available and they fit the later 
model B body manifolds as well.  Measure the depth of the hole in the 
manifold to the point where there is a flat ledge inside, then order the 
correct length, either 1-7/8" or 2-7/8"....Brian

Scott Ostrowsky wrote:
> 
>  I have a releated questions. I am using factory max wedge headers on my
> engine. Is there a sprecial bolt you use for the one that is recessed 
> and
> kind of goes through the manifold?
> 
> Scott
> ----- Original Message ----- 
> From: "Sean Bolter" <bolterman@xxxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxx>
> Sent: Friday, September 17, 2004 12:16 AM
> Subject: Re: Exhaust Studs
> 
> 
> [AD removed for archives]
> -------------------------------------------------------------------
> Sponsor a child today through Children International.
> Give a desperately poor child hope for a brighter future.
> For only $18 a month you can make a difference!
> caacBBFb6IRuka/ChildrenInternational
> -------------------------------------------------------------------
> 
> Believe me, I tried many hardening sealants in the head side, and they
> ALL failed.  My buddy told me to use a non-hardening sealer, and I told
> him he was nuts, it could never work.
> 
> Worked like a charm, first time out.
> 
> [AD removed for archives]
> -------------------------------------------------------------------
> Are Americans getting fat? Give us your opinion and win.
> caacDvYb6IRukf/PermissionData
> -------------------------------------------------------------------
> 
> ----
> Please address private mail -- mail of interest to only one person -- 
> directly to that person.  I.e., send parts/car transactions and 
> negotiations
> as well as other personal messages only to the intended recipient, not 
> to
> the Clubhouse public address. This practice will protect your privacy,
> reduce the total volume of mail and fine tune the content signal to 
> Mopar
> topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
> 



'64 Belvedere
Woodstock, IL.

[AD removed for archives]
-------------------------------------------------------------------
Tired of annoying POP-Ups? Get a free Pop-up blocker here!
caacERPb7yoMzf/PermissionData
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.