Re: Torque Boxes

[WC43613@xxxxxxx]

[AD removed for archives]
-------------------------------------------------------------------
Are Americans getting fat? Give us your opinion and win.
caacDvYb7yoMza/PermissionData
-------------------------------------------------------------------


I did my frame ties the same way as Earl has described. I just cut into the  
front of the spring box using the 2 x 2 boxed steel and welded it on 3 sides 
and  the same at the front keeping it even with the bottom of the subframe. 
Didn't  use any gussets though. I put the 2 x 2 into the back subframe as far as 
I could  so I could weld the two holes on the bottom of  it also to the frame 
tie.  And I didn't have to cut the floor at all.
 
Bill C.
64 Sport Fury
493 Max-Wedge clone

[Non-text portions of this message have been removed]

[AD removed for archives]
-------------------------------------------------------------------
Give your opinion on Abortion and Win!
caacERNb7yoMzf/PermissionData
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.