RE: 65 belv oil pan

["Gary H." <62to65mopar@xxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Get 4 Free low-fat, low-carb recipes
caacLQbb7yoMza/PermissionData
-------------------------------------------------------------------

Gary Bradshaw reported a good fit putting a Mildon oil pan (part number 
31010) in a big block 1962 Dart, in case that helps. 

http://www.1962to1965mopar.ornocar.com/oilpans.html and 
http://www.autohobbydigest.com/pans.html are Web pages that may help.

Gary H.


> I can tell you from experience, nothing I've found will clear the 
> >linkage but the original.
> My 361 has the original pan back on.  I have a miloden that won't clear.
> 
> Tom
> Go Red Sox!!
> 
> -----Original Message-----


> Subject: 65 belv oil pan
> 
> 
> anybody have an oil pan for a 65 383, or know where i can get one?  
> found
> out the hard way the original 68 pan on my engine wont work.  had a 187 
> pan
> from a later cbody, but found out it has a crack in it.  really getting 
> good
> at putting this engine in and taking it out.  thx colin

[AD removed for archives]
-------------------------------------------------------------------
Claim your tickets to Universal Orlando now
caacJzlb7yoMzf/PermissionData
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.