Re: EXHAUST MANIFOLD STUDS

[Jimmy Peavy <peaver63@xxxxxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Amazing Diet Patch
The fastest - Easiest way to lose weight! Try it now FREE!
caacOlIb7yoMza/MyDietPatches
-------------------------------------------------------------------

I checked on each of these and unless I missed something
they are only good to 300 degrees and less.
I don't think they'd work on exhaust studs for that reason.

Jimmy



Tom Duross wrote:

> [AD removed for archives]
> -------------------------------------------------------------------
> Stock car lovers - get a FREE gift here!
> caacSnKb7QKt5a/PermissionData
> -------------------------------------------------------------------
>
> Jimmie, et al:
>
> I used an anaerobic pipe sealant called "superdope" (www.pipingtools.com),
> there are others like permabond (www.permabond.com).
> Anaerobic seal anything and very tightly, and resist high temperatures and
> allow disassembly.  This is just what I use in the piping trades every day
> and swear by it.  It fills slight gaps and even seals cross-threads.  Worked
> for me. Should be clean of course.
> Just my opinion and advice.
>
> Tom
>
> -----Original Message-----
> From: Jimmy Peavy [mailto:peaver63@xxxxxxxxxxxxxx]
> Sent: Saturday, November 20, 2004 11:59 AM
> To: 1962to1965mopars@xxxxxxxxxx
> Subject: Re: EXHAUST MANIFOLD STUDS
>
>
> Teflon won't tolerate that much heat. It will  emit a poisionous gas as
> well when exposed to that much heat.
> In the petrochemical industry, I use anti-seize almost daily , and while
> it does prevent the nuts from ever seizing on a bolt, it does'nt seal
> threads.
> At least nothing I've used has.
> There are a number of types that contain copper, or nickel.
> The nickel being the best, and most compatible with every metal.
> If it worked for you that's great, but it won't seal my threads.
> It's not designed to. Even with clean threads.
> I don't favor red RTV to do that, as well, but it will .Permatex will also.
> It is the last resort for me, and will do the job.
>
>
> Jimmy
>
>
> -------------------------------------------------------------------
>  

[AD removed for archives]
-------------------------------------------------------------------
Stock car lovers - get a FREE gift here!
caacSnKb7yoMzf/PermissionData
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


b7yoMz.