Re: mounting air compressor

[walt <wrutskijr@xxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Free Thanksgiving recipes for you
caacZpwb7yoMza/PermissionData
-------------------------------------------------------------------

I mounted mine on a couple of pressure treated 2x6 with carriage bolts thru
the 2x6 and thru the compressor mounting brackets with wide washers and lock
nuts. .  The 2x6's are laid flat for a wide stable area on the floor and it
does not move around at all and they take care of all the vibration and I
have had mine mounted this way for 5 years with no problems and I use mine
compressor a lot as I have a lot of different air tools.
I do wood work also.  I also did not want to drill my floor

Walt


----- Original Message ----- 
From: "Robert neal zimmerman" <northwestweirdo@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Friday, December 17, 2004 9:15 PM
Subject: mounting air compressor


[AD removed for archives]
-------------------------------------------------------------------
** Get Your Own Support-a-Cure Yellow Bracelet for $1.99 **
Show your support for finding cures for both AIDS & Cancer.
Get yours for just $1.99. This bracelet makes a difference.
caacVlObWlOpYa/Penn Media
-------------------------------------------------------------------

 If I bracket and strap my big 220 air compressor to the studs in the
 wall do u guys think that will be enough, or will it still bounce up
 and down  on the concrete garage floor.If it bounced it could also
 eventually compromise the welds in the compressor;
   BUT!!!!!-
    I really want to avoid drillling holes in the floor.
      Neal ZImmerman, Eugene Oregon

[AD removed for archives]
-------------------------------------------------------------------
Amazing Diet Patch
The fastest - Easiest way to lose weight! Try it now FREE!
caacVmibWlOpYf/MyDietPatches
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- 
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.

[AD removed for archives]
-------------------------------------------------------------------
Amazing Diet Patch
The fastest - Easiest way to lose weight! Try it now FREE!
caacVmib7yoMzf/MyDietPatches
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.