RE: leaf springs

[Dave Walters <whdavid@xxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Amazing Diet Patch
The fastest - Easiest way to lose weight! Try it now FREE!
caacYkHa/MyDietPatches
-------------------------------------------------------------------


FosberyJ@xxxxxxx wrote:
> 
> 
> Hello to all, I just got some leaf springs from summit for my 65 Sat, I  
> have 
> mounted the left side and did not remove the right side to make sure 
> every  
> thing aligned but the center pin on the new springs is towards the back 
> about  
> 1and a 1/2 inches, can anyone tell me if this is going to screw anything 
> up?  
> like the center of the wheels or the yoke into the tranny.Thanks  Jeff
> 
> [Non-text portions of this message have been removed]
> 

So,you have one that's un-installed laying on the ground? 65 springs are 
21/35 OEM.Meaning 21" from the front spring eye to the locating pin.35" 
from the rear spring eye to the pin.56" eye to eye.Measure what you 
have.You should be within a 1/2" of my measurements because your spring 
is unloaded/not installed.Get back to us with the results 


  Dave Walters
  Denver, Co.
  

[AD removed for archives]
-------------------------------------------------------------------
Get a Holy Bible for FREE!
caacYkCf/PermissionData
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



http:///u/?.