Re: factory seam sealers

["62-65-mail-list-club-Gary-H" <62-65-mail-list-club@xxxxxxxxxxx>]

Good cause to worry, as water is not a friend of metal. Keep it away! 

A friend of mine worked in body shop repair for years; I can see what he suggests and will report that if I can get in touch with him.

Is there a section in a Mopar Factory Service Manual's "body" pages  "Body" section that details where sealer should be applied and how, on the body seams?

Generally what I recall is the sequence is primer > seam sealer > paint. 

There are two part seam sealers also that some folks prefer.

Here's a couple general links:

https://www.3m.com/3M/en_US/collision-repair-us/applications/seam-sealers-and-coatings/general-seam-sealer-sop/

https://www.motortrend.com/how-to/resto-tech-apply-seam-sealer-correctly/

Thanks,
Gary H.

 

>  -------Original Message-------
> 
>  
>  I am putting new quarter panels on my off topic (1968) Mopar. When I
>  removed the originals I found a flesh/tan colored sealer of some sort
>  between the wheel opening flange of the quarter and the wheelhouse
>  lip. Basically where the spot welds are at the wheel opening. I
>  couldn't figure out how you could get it in there unless you applied
>  it to the wheelhouse lip before quarters were hung.
>  Does anybody know if that's what they did at the factory and what the
>  product was. It was not hard but kind of gummy or spongy. I guess it
>  could be some kind of goop or maybe a dum-dum type putty.
>  I am thinking /worrying about this as I wonder how you keep water from
>  getting between those two surfaces.
>  Thanks,
>  Neal Zimmerman --
>  --
> 

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/20230614171917.33513.qmail%40server309.com.