[AD removed for archives] ------------------------------------------------------------------- Is your PC running at 100%? Check your PC's health in 2 minutes! caadlAsbOyW3Na/PC Health Check ------------------------------------------------------------------- I just got back from my friend's house to look at the problem he's having while trying to install KYB rear shocks on his '69 Super Bee. He just bought a pair of the KG5512 from Mancini. They will not fit into his upper rear shock mount. The shock body hits on the mount before the hole for the bolt lines up with the hole in the body mount. We set the 2 shocks side by side and found that the one he removed had a domed top, but the new KYB has a flat top. That difference makes the mounting hole 1/4" too short from lining up. The Japanese may have made an engineering change to the shock without recognizing this to be a problem, because the centerline of the top to bottom holes are the same as the original shock. My friend will contact Mancini tomorrow to let them know what we found. I suggested that he use the Mopar Super Stock rear shocks, part number P4529515. That's what I put on my '64 Belvedere yesterday. Brian '64 Belvedere Woodstock, IL. [AD removed for archives] ------------------------------------------------------------------- Click Here for the #1 Investigative tool on the Net! caadlCpbOyW3Nf/Web Detective ------------------------------------------------------------------- ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. bOyW3N.