Re: confusion, timing covers, balancers, help please.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: confusion, timing covers, balancers, help please.



[AD removed for archives]
-------------------------------------------------------------------
Is your PC running slow? Try a FREE PC Health Check today!
caadlCkbOyW3Na/PC Health Check
-------------------------------------------------------------------

Sounds like you have the One that would have a bolt-on bracket (For
Passenger Side).  The other would have been cast into the timing cover
on the drivers side.

Different Timing Cover, Different Water Pump
On Fri, 15 Apr 2005 11:56:47 -0700, "Robert neal zimmerman"
<northwestweirdo@xxxxxxxxxxx> said:
>   I need help. I think I am  figuring out whats wrong with my 273- the
>   front of this /radiator/ waterpump/ timing case setup has all been
>   cobbled together with wrong pieces  and I need to straighten it out. 
>    In pre 70  273/318/340 ( LA) engines the timing mark is supposed to
>    be on passenger side. 70 and up its supposed to be on driver side,
>    with a corresponding switch in the water pumps outlet.
>    Heres problem #1 - the timing case on the engine has no timing marks
>    on either side! where did this timing cover come from? its smooth, no
>    raised boss with marks on either side!
>     Could this be a poly case somebody stuck on there, I know they
>     interchange, what was the timing mark setup like on a poly 318 case?
>     (Smooth? left /right? a mounted tab for marks???)
>    Problem #2-  BALANCE- so I found a 1967 318  in a junkyard.
>      Now  that should give me the right  timing cover(marks on 
>      passenger-side) for my 67 273. Balance should be the same too as
>      the 67 318 was a steel crank like the 273.
>   So heres the question- if I  take that timing case from the 318 , do I
>   also need the balancer from that engine? Or would the one on my  273
>   be the same? See I dont know if the balancer on my 273 was for a
>   passenger side or drivers side  timing marked engine. AGGHHHH! What do
>   I do? Are there numbers on the balancers that will definitely iron
>   this out?
>    Shoot me now!
>    Neal Zimmerman, Eugene Oregon
> 
> [AD removed for archives]
> -------------------------------------------------------------------
> Investigate just about anyone and anything with Web Detective!
> caadlCmbVb6jBf/Web Detective
> -------------------------------------------------------------------
> 
> ----
> Please address private mail -- mail of interest to only one person --
> directly to that person.  I.e., send parts/car transactions and
> negotiations as well as other personal messages only to the intended
> recipient, not to the Clubhouse public address. This practice will
> protect your privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic.  Thanks!
Tom
65 Dart GT 'vert
68 Plymouth 'vert
Las Vegas, NV

[AD removed for archives]
-------------------------------------------------------------------
Want a laptop? Get an Apple iBook for free! 
caadlVBbOyW3Nf/Amazing Computer 
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.









Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.