Re: Rockerarms adjustment

[Thomas R Hansen <trandco1@xxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Erase wrinkles without Botox!
Nexiderm SP is clinically proven to reduce wrinkles by 68%. Click 
here to start looking younger today!
caadslIbOyW3Na/Nexiderm
-------------------------------------------------------------------

> 
> what is the gain in using adjustable rockers
> on hydraulic cam?
>  
> just curious
> tom
> 65 satellite
> 
 If I'm not mistaken, these rockers were = roller- 1.6 ratio.  Can be
used on both solid and hydraulic cam lifters, and the adjustable part
makes them go either way. May also help with minor differences between
manufacturer's pushrod lengths, and block decks not squared.  Don D.
mentioned block decks not too long ago in one of his informative emails,
as not always correct from the factory. And it was also mentioned lately
that some cam manufacturers want the lifter adjusted so as not to pump up
at high RPMs, and stock rockers on shafts only fit one way, right, or
close enough, for factory production.    Tom in Dallas

[AD removed for archives]
-------------------------------------------------------------------
Get both the MiFi XM Satellite Radio and an Apple iPod for Free! 
caadtaJbOyW3Nf/ProductTestPanel 
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.