426 blocks

[Brian Schlump <jsbs@xxxxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Get a Free Sirius Satellite Package, don't pass on this!
caadwPhbOyW3Na/ProductTestPanel
-------------------------------------------------------------------

I believe that the 426 TMP was the designation for the 415 hp version of 
the Max Wedge with 11 to 1 compression ratio pistons.  The 426 TMP-HC 
was the 425 hp version with 12.5 to 1 compression ratio.  The blocks 
could have easily been used for the street wedge version in either '64 
or '65....Brian

DODGERT70@xxxxxxx wrote:
> 
> 
> I had a 1965 Satelite that I bought new that came with a 426 TMP block, 
> but  
> was a 426 street wedge. I also ran into a 65 Coronet that also had the 
> same  
> setup. i imagine that they had a few max wedge blocks left, and used 
> them up as 
>  street wedges.
> 
> [Non-text portions of this message have been removed]
> 



'64 Belvedere
Woodstock, IL.

"The difference between ordinary and extraordinary is that little 
extra."

[AD removed for archives]
-------------------------------------------------------------------
Need a new washer and dryer set? You could get one free!
caadtaGbOyW3Nf/ProductTestPanel
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.