Re: 426 blocks

[Derrick Brown <derrickb@xxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Get a Free Sirius Satellite Package, don't pass on this!
caadwPhbOyW3Na/ProductTestPanel
-------------------------------------------------------------------

I recall my 63 stage II set up to be 13.5 to 1 (also 425hp) stock and  
the 64 Stage III to be 12.5 to 1

> On page 745 of the 1967 Motor's Auto Repair Manual it states that the
> 426 TMP-HC had 13.5 to 1 compression.  However on page 9 of the 1964
> Plymouth Super Stock 426-III owner's manual, it says 12.5 to 1, so I
> figured the Plymouth manual was probably correct...Brian
>
> Laneslyle8@xxxxxxx wrote:
>
> > I had always thought that the 425 horse version was 13.5 to 1
> > compression....hmmmm
> > Lyle in Montana
> >
> > [Non-text portions of this message have been removed]


Derrick
derrickb@xxxxxxx
'63 Sport Fury

[AD removed for archives]
-------------------------------------------------------------------
Erase wrinkles without painful injections with Nexiderm SP.
Nexiderm SP is clinically proven to reduce wrinkles by 68% Click 
here to get your 30-day free supply.
caadvf5bOyW3Nf/Nexiderm
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


bOyW3N.