Re: KB 383

[Joeydahook9@xxxxxxx]

[AD removed for archives]
-------------------------------------------------------------------
Buying or Selling a Home? Get the Facts Before Buying or Selling! 
Get a FREE Home Valuation TODAY!
caadV2pbOyW3Na/Home Valuation 
-------------------------------------------------------------------


Don - You're right on with the ring-gap info when using hypereutectic  
pistons.  KB recommends .0065 per bore inch on  street/strip motors.  More with 
power adders.  This worked out to  be .028 on my top ring.  After conversations 
with you, kb, and Hastings,  the number 2 ring was gapped at .017.  I haven't 
much experience with the  hypereutectic's, but the forged pistons would have to 
be made for the 451.   The kb's are supposed to be fine as long as the rpm's 
are reasonable  and no power adders are used.  There is a ton of piston info on 
the kb  site.  Joe  

[Non-text portions of this message have been removed]

[AD removed for archives]
-------------------------------------------------------------------
Ben & Jerry?s® or Häagen-Dazs®?
Take our Nationwide Ice Cream Survey today! Receive a FREE* $100 
Restaurant Gift Card of your choice or $100 worth of Ben & 
Jerry?s® or Häagen-Dazs® ice cream for participating!
caadVYQbOyW3Nf/Ice Cream Research Survey
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.