Re: max wedge exhaust manifolds

[Bob Fortson <bobt1885@xxxxxxxxx>]

Thanks Dave, ...I have tried to call A & A Trans., but
the "tech expert" won't be in until 4 pm cdt... One of
these days I'm gonna publish a manual on the things
that don't work /fit first time around...Oh, well,
This is supposed to be the fun part , right ?
Bob--- Dave Casey <dcasey@xxxxxxxxxxxxx> wrote:

> Your free subscription is supported by today's
> sponsor:
>
-------------------------------------------------------------------
> Get $1000.00 Overnight! Fast and Easy!
> No Credit Checks! Many Lenders are 100% Paperless!
> Let The Wizard Find the right Lender for you!
>
caadVJ5bQmH9Ma/911PaydayAdvance
>
-------------------------------------------------------------------
> 
> Bob -
> 
>     If you can spare the original appearance, you
> could always get one of 
> those trick street rod dipsticks and tubes
> (stainless braided flexible 
> dipstick tube) which you can easily route past your
> manifolds and mount on 
> the firewall or fenderwell. I think Lokar might make
> them.
> 
> Dave Casey
> 
> ----- Original Message ----- 
> From: "Bob Fortson" <bobt1885@xxxxxxxxx>
> To: "mopar bulletin board"
> <1962to1965mopars@xxxxxxxxxx>
> Sent: Tuesday, September 27, 2005 9:40 AM
> Subject: max wedge exhaust manifolds
> 
> 
> >I have been informed that I have a conflict between
> > the manifold and the transmission "dip stick" .
> The
> > tranny is a 727 . The stick is "hitting" the
> > manifold...I'm going to the shop to see it for
> > myself...anybody got a solution or advice ?
> > The car is 63 Fury 'vert...440 based MW
> clone...TTI
> > exhaust system...
> > Bob Fortson
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam?  Yahoo! Mail has the best spam
> protection around
> > http://mail.yahoo.com
> > 
> 
> Your free subscription is supported by today's
> sponsor:
>
-------------------------------------------------------------------
> Buying or Selling a Home? Get the Facts Before
> Buying or Selling! 
> Get a FREE Home Valuation TODAY!
> caadV2pbQmH9Mf/Home
> Valuation 
>
-------------------------------------------------------------------
> 
> ----
> Please address private mail -- mail of interest to
> only one person -- directly to that person.  I.e.,
> send parts/car transactions and negotiations as well
> as other personal messages only to the intended
> recipient, not to the Clubhouse public address. This
> practice will protect your privacy, reduce the total
> volume of mail and fine tune the content signal to
> Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
>
> 
> 
> 
> 



		
__________________________________ 
Yahoo! Mail - PC Magazine Editors' Choice 2005 
http://mail.yahoo.com