RE: U-joint or Yoke ?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: U-joint or Yoke ?



[AD removed for archives]
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC
Take a 2-minute PC health check-up at no charge!
caad3p7bOyW3Na/PC PowerScan
-------------------------------------------------------------------

Hmmmm, I don't know Jake. I see that except for the max wedge the 64 
rear is listed as being wider than the 63. Now I just read this on the 
AllPar site:

"The third time around was the 1964 model. It carried sheet metal 
identical to the 1963 from the doors back, except for a wider rear to 
hold a 2" wider axle."

Is your Fury red btw?

Dan


Douglas J wrote:
> 
> There's good news !
> 
> Jake
> 
> >From: george smith <bt6t4@xxxxxxxxx>
> >Reply-To: 1962to1965mopars@xxxxxxxxxx
> >To: 1962to1965mopars@xxxxxxxxxx
> >Subject: RE: U-joint or Yoke ?
> >Date: Sat, 1 Oct 2005 11:19:24 -0700 (PDT)
> >
> >I had a 69GTX housing in my 64 Polara w/ 8" steelies
> >and 275/60R15's with room to spare.Now I have a Dana
> >60 from a 69 RR. No clearance probs at all.
> >


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.








Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.