RE: 4 bolt valve cover clearance on 63 MW

[Brian Schlump <jsbs@xxxxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC
Take a 2-minute PC health check-up at no charge!
caad3p7bOyW3Na/PC PowerScan
-------------------------------------------------------------------

Derrick,
I'm using 2 of the thick Mr. Gasket valve cover gaskets that are glued 
together.  Could give you the 1/4" you're looking for...Brian

Derrick Brown wrote:
> 
> hi all,
> 
> Im nearly complete on a complete motor restoration (with some  
> upgrades) to a 63 stage II set up.
> The cam will have approx 580 lift.
> I notice the rockers are tapping the inside baffle of the valve covers 
> (standard 4 bolt mw valve covers).  im a bit surprised at there being  
> a clearance problem with these valve covers.  the cam isnt that  
> radical, also yes , indy shafts and mp roller rockers.
> 
> have anyone else experienced this?  if so what was your work around.   
> i can hack up the actual baffle but there must be a more elegant  
> solution.
> 
> does anyone know if someone makes a"stand off" shim about a quarter  
> inch in thickness which would mount at the head casting along with a  
> pair of gaskets just to raise the height of the valve cover?  just a  
> thought.
> 
> thanks
> 
> Derrick Brown
> derrickb@xxxxxxx
> 63 Plymouth Sport Fury
> 



'64 Belvedere
Woodstock, IL.

"The difference between ordinary and extraordinary is that little 
extra."


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.