RE: Transmission Lines and Brake Questions Too
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Transmission Lines and Brake Questions Too



[AD removed for archives]
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC
Take a 2-minute PC health check-up at no charge!
caaegt3bOyW3Na/PC PowerScan
-------------------------------------------------------------------

First off there is no dumb or ignorant question. The only one is the one not asked when you do not know. l Now most line's from a 727 will be usuable from the trans toward the rad. You should be able to make them work if from a E body or even a A body that has a 904. Lines are pretty much the sam.e

MOPAR413 Polara 500 (Gary)

[AD removed for archives]
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC
Take a 2-minute PC health check-up at no charge!
caaegt3b6eGsBa/PC PowerScan
-------------------------------------------------------------------


I hate to ask questions on this site because it shows my ignorance...but here goes.


I have a 63 Valiant with a 318/727 combo installed by the previous owner. The transmission lines already on the car are cobbled together and dangerous too. Both front and rear lines come out of the transmission and turn 90 deg to the front, where they are quickly mated to rubber hoses which extend to near the radiator, and again attach to short steel lines coming from the radiator. Of course, can't forget the inevitable hose clamps all over the place...upon close examination I found steel line coming from the transmission to be severely crimped, close to the point of being non-functional. I've tried making my own transmission lines in the past without any success and have decided to either: (1) purchase a ready made set, or (2) go to a custom system. Obviously, the ready made set would be cheaper. Of course, since the 318 didn't come in 63, nobody makes the correct lines. I was wondering if any of the later year lines 66 and up would fit?

Brakes...I am converting from single to dual master cylinder and at the same time, trying to still use the drum brakes front and rear. The fronts have been changed to 11". What master cylinder should I ask for at my local vendor? With the car came a distribution block (exact name escapes me) for the brakes which mounts to the frame. It is pretty filthy from neglect and I was wondering how to clean it properly inside and out. The next project after that will be to plumb in a whole new system of brake lines, replacing at that time, the dangerous lines to the rear, and non-existant lines to the front. Any help you can provide this old guy would sincerely be appreciated. Thank you.
[Non-text portions of this message have been removed]


[AD removed for archives]
-------------------------------------------------------------------
Make phone calls with phone service from Packet8.Order VoIP
today & get Free Activation, Free Equipment & First Month
Free! Packet8 30-day money back guarantee. 1-877-868-1135
caaegt4b6eGsBf/TMONE
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!


'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.



_________________________________________________________________
FREE pop-up blocking with the new MSN Toolbar ? get it now! http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/


[AD removed for archives]
-------------------------------------------------------------------
Oprah vs Dr. Phil- who is your favorite? Vote now.
caaeg0WbOyW3Nf/Your opinion
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.


bOyW3N.






Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.