RE: Pitman arm

[Brian Schlump <jsbs@xxxxxxxxxxxxx>]

That's a good point Rich.  My bolts loosened one time, and my buddy's 
'69 Super Bee had the same thing happen.  We each used Loctite on the 
threads, and haven't had them loosen up again.


Richard Kinsley wrote:
> 
> 
> Brian Schlump wrote:
> > 
> > The steering is feeling a little loose in my '64 Belvedere.  Tonight I 
> > had my wife move the steering wheel left and right,and I can feel up and 
> > 
> > 
> > down movement in the ball socket that attaches to the relay rod.  
> > Everything else feels tight.  I think I should replace the pitman arm.  
> > If you guys agree, where is the best place for me to buy one?
> > Brian
> ---------------------------------------------------------------------
> 
> I got mine from Just Suspension. Be sure to check everything. Mine was 
> sooooo loose. The steering box bolts were so loose I could turn them in 
> many turns by hand! It was miraculous how much better it handled and 
> stopped after my suspension upgrade.
> 
> 
> Rich Kinsley  '64 Polara 4 dr 318poly w/goodies



'64 Belvedere
Woodstock, IL.

"The difference between ordinary and extraordinary is that little 
extra."


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

bSONJP. 
Or send an email to: 1962to1965mopars-unsubscribe@