Re: Valve Cover Resto

[Schuyler <schuyler62@xxxxxxxxxxxxx>]

I never liked those things, just another sharp object to cut myself  
on while trying to tune the car.
so when one of mine came loose I pitched it, and the other one too. I  
use those plug wire clips/
organizers you can get at most any auto parts stores. plus, I think  
the Poly valve covers look much
better without them. just my opinion, so... otherwise, the plastic- 
dip sounds good if you want to keep
it stock.
Schuyler
62 Dodge Dart 440 wagon w/ Poly 318
 <http://www.1962to1965mopar.ornocar.org/ml-wrobel62.html>
FYI - I Do the Decal designs for the Poly head 318 and more! email me  
with your needs -
 <schuyler62@xxxxxxxxxxxxx>


On Nov 30, 2006, at 8:18 AM, Bill Maurits wrote:

> I'm thinking about pulling my valve covers and possibly intake this
> winter for a clean up & repaint. The wire looms that are on the VC's
> are metal but appear to have had SOMETHING on the area where the plug
> wires snap it. Any ideas whet this was and or what I could use now?
> Maybe some plasti-dip? I just changed the wires and you can see where
> the now bare metal looms were cutting into the wires.
>
> Thanks
>
> Bill M
> 65 Coronet 500 'vert
>
>
> ----
> Please address private mail -- mail of interest to only one person  
> -- directly to that person.  I.e., send parts/car transactions and  
> negotiations as well as other personal messages only to the  
> intended recipient, not to the Clubhouse public address. This  
> practice will protect your privacy, reduce the total volume of mail  
> and fine tune the content signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. -- 
> ^----------------------------------------------------------------
> This email was sent to: schuyler62@xxxxxxxxxxxxx
>
> http:///u/? 
> .bNHQrt.c2NodXls
> Or send an email to: 1962to1965mopars-unsubscribe@


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

bSONJP. 
Or send an email to: 1962to1965mopars-unsubscribe@