RE: complete front rebuild kits?

[ledman_70@xxxxxxxxxxx]

Kinda on/off topic, but I had to replace all the ball joints in my 99 
Dakota R/T 2 years ago at about 70k miles. I used some Moog parts I got 
off Ebay and they squeak sometimes. I lube them and they stop for a 
while, then start again, and they are rubber. It's really annoying, so I 
wouldn't use ANY parts that might make inappropriate noises...I already 
do that enough myself, according to my wife.
Jeff
Bill Maurits wrote:
> 
> I have a friend that rebuilt the front end of his Dart Sport w/ poly
> bushings, followed all the recommendations about lubrication, and
> could not get them to stop squeaking. He finally had enough and
> rebuilt it again w/ rubber ~3000 miles later.
> 
> Personally, I would NEVER use poly bushings unless it was on a race
> only road course car or something. You really don't need them on the
> street.
> 
> Bill M
> 65 Coronet 500 'vert
> 
> 
> On 12/12/06, mcwheels@xxxxxxxxxxxx <mcwheels@xxxxxxxxxxxx> wrote:
> >
> > The other problem is that just about everybody I know who's used the
> > polyurathane ot even the polygraphite bushings is complaining that they
> > squeek.
> >
> > Dan
> >



Jeff Adams
64 Polara


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

. 
Or send an email to: 1962to1965mopars-unsubscribe@


http://www/?p=