Re: Horn Ring 'died'

[Bill Maurits <Y1TopBanana73@xxxxxxxxx>]

I pulled the wheel, and the rivets let go and the metal plate has come
loose. How can I fix it? If I can get the plate back on, can I re-peen
the rivets? or maybe drop on a dab JB Weld? Or should I send it out to
someone?

Bill M
65 Coronet 500 'vert


On 12/18/06, Steve Stasko Jr. <sixpakdodge@xxxxxxxxx> wrote:
> Yes.
> --- Bill Maurits <Y1TopBanana73@xxxxxxxxx> wrote:
>
> >
> > Lift it as in pull it towards you?
> >
> > Bill M
> > 65 Coronet 500 'vert
> >
> >
> > On 12/17/06, Steve Stasko Jr.
> > <sixpakdodge@xxxxxxxxx> wrote:
> > >
> > > On a 65, Lift the center and turn it. It will
> > slide
> > > out.
> > > --- Bob Fortson <bobt1885@xxxxxxxxx> wrote:
> > >
> > > >
> > > > Bill...My '63 horn ring has small screws thru
> > the
> > > > back
> > > > of the wheel spokes into the ring. The ring is
> > > > mounted
> > > > on springs that these screws determine the
> > > > compression
> > > > of...if a screw is gone, striped or simply
> > backed
> > > > out
> > > > the spring will allow the ring to flop as
> > > > described...upside down ...head under the
> > > > wheel...feet
> > > > over the seat back...check it out ! By the
> > way...do
> > > > you take blood pressure meds ? I do! Get dizzy
> > as
> > > > hell
> > > > doing this trick...maybe thats why I HATE under
> > the
> > > > dash repairs !
> > > >
> > > > Bob Fortson


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

. 



http://www/?p=