Re: rear end
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: rear end




Don are you saying that the 741 pot from the 66 non tapered axle will fit the 64 tapered axle!! Also the new street axles with the Green bearings will replace the tapered axles in my rearend?? I have to admit I am a real amatuer when it comes to these problems so I really appreciate your knowledge on this subject. I thank all who have replyed to my post. Terry ----- Original Message ----- From: "Don Dulmage" <big-d@xxxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Wednesday, December 20, 2006 6:58 AM
Subject: rear end




What possible benifit or upgrade would you get from that. I guess I just dont understand the worry. Your diff already takes a 741 pot and posi with no trouble. if you want to get rid of the tapered axles for some reason (they wont break by the way. i know cause i have tried!) get Moser or Bear or MW to make you a set of Street axles with the so called green bearings (non tapered self centering) and you are done , forever!

i run the stock 63 tapered axles a 741 diff with a cone type posi in my 63 MW 426. I have a 3800 converter and 3:91 gears with 30.5 inch tall tires and i pound the living daylights out of it everytime i go for a drive (when the wife isnt along ;>) since the year 2000. Been good so far.
Don
Author of
Return to Deutschland (True Adventure)
Old Reliable (Mopar)
http://stores.ebay.ca/Don-Dulmage-Enterprises
http://seniordragster.bravehost.com/index.html
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.




----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.
This email was sent to: arc.6265@xxxxxxxxxxxxxx

.


http://www/?p=





Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.