[no subject]

[Doug Ahern <D170A833@xxxxxxxxxxxxxxxxxxx>]

Does anyone else think the Chrysler rattle can "Turquoise" P4120752
isn't the correct hue for our cars?  The color is generally listed
as 62-68 B/RB, and 69 non-HP B/RB.  exec. Hemi and MW cars.

it seems to be its too blue and too dark.  I've compared it to several 
original engine paint parts (oil pans, valve covers, remaining paint on
blocks..,etc) and it seems "too blue" to be correct.    I've even 
sprayed some sample pieces and then baked them in the oven to see
if high heat would cure the paint to a different color.

here is a piece (not baked!!) that shows the P4120752  color 
on the right and the color that I think is more accurate on the left.

http://www.autohobbydigest.com/msl/?5399

what do y'all think??


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

http:///u/?.. 
Or send an email to: 1962to1965mopars-unsubscribe@


http:///?p=