RE: Cam recommendation

[Dave Walters <whdavid@xxxxxxxxx>]

Gary Futrell wrote:
> 
> I need a good cam recommendation for my engine I'm putting together
> for my 64 Savoy. My shortblock will be done in a few days from the
> machine shop. This is my first Hemi motor  ( hey, better late than
> never ) and I'll be running a four speed with a 4.10 Dana. I have a
> single four intake now but will be buying a crossram.  I'm using 10.2
> compression pistons. I plan on running it at the track but will drive
> it on the street occasionally.  I don't mind running solids unless
> there's  a good hydraulic that might work.  Any suggestions ?

Gary,

You've been around Moparts enough to probably hear the name Scott Brown 
a few times.He's at Straightline cams and is a sponsor.I have one of his 
custom cams in my litle stroker,but it's not on the road yet so I can't 
tell you how it runs.

He probably has an off-the-shelf grind that'll work for you, but a 
custom is only a few bucks more.


  Dave Walters
  Denver, Co.

  64 Bel Wagon
  64 Savoy Post  
  64 Dodge 330 Post
  63 Savoy


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

http:///u/?.. 
Or send an email to: 1962to1965mopars-unsubscribe@


http:///?p=