Re: Polara trans cont...

[Jimmy Peavy <peaver63@xxxxxxxxxxxxxx>]

Mine is the original length and it lays on the header collector.
I insulated it and made a heat shield for it as well.
The heat shield is a piece of aluminum conduit bent in the shape of the 
route that the cable takes. Kinda of a long, stretched out "U".or better 
yet, a long "L" shape.
I cut the top part of the conduit off the full length, making it a 
little more that half a thickness of pipe.. I stuff the cable into the 
conduit.
It can't be a tight fit, as it has to be removed to work on the cable or 
transmission.
It does make the cable burn proof.
I can't say how many I burned up prior to making that heat shield.

 Good luck
  

   Jimmy


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.