Re: How much brake fluid?

[Bill Maurits <Y1TopBanana73@xxxxxxxxx>]

OK...thanks! I was just concerned about filing up the bolt hole for
the lid w/ fluid and then cracking the master cylinder when I ran the
bolt down in. Thanks again!

Bill M
65 Coronet 500 'vert


On 3/3/07, Schuyler <schuyler62@xxxxxxxxxxxxx> wrote:
> My '64 Service Tech. Manual says "Fill to 1/4-
> inch below top of reservoir."
>
> Schuyler
> 62 Dodge Dart 440 wagon w/ Poly 318
>   <http://www.1962to1965mopar.ornocar.org/ml-wrobel62.html>
>
>
>
> On Mar 2, 2007, at 7:15 PM, Bill Maurits wrote:
>
> > I was starting to go over the Coronet today in prep for the upcoming
> > driving season...check fluids, brakes, grease front end, etc, etc. I
> > need to ask a really stupid question...how much brake fluid do I put
> > in the master cylinder? I've never had a car w/ a single reservoir and
> > a screw on lid. Do I fill just below the threads? or all the way up?
> >
> > Thanks!
> >
> > Bill M
> > 65 Coronet 500 'vert
>
>
> ----
> Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.