RE: A903 reproduction codes?

[pjpere@xxxxxxxxxxxxxxxx]

Thank you for  the info. But because I'm sure my local supplier would 
have had access to the required info ten years ago  as well, it's 
possible that another local shop would face now the same difficulties. 
Hence I would still like  to get to learn the codes (part numbers) for 
the needle bearings and alike for an A903 gear box.

Pekka


mcwheels@xxxxxxxxxxxx wrote:
> 
> Pekka, I had to rebuild a Borg Warner T-10 years ago and this place 
> didn't have a kit but was able to supply me with everthing I needed. 
> They have a web site but it seems to be down right now but here's their 
> address and phone number.
> 
> ACME Bearings
> Address: 1387 Niagara Street, Buffalo, New York (NY), 14213, US 
> Tel:  800 479 9005 
> 
> 
> 
> pjpere@xxxxxxxxxxxxxxxx wrote:
> > 
> > Hello!
> > 
> > My 1965 Valiant's A903 gear box (manual 3-speed) needs new bearings and 
> > alike. My local dealer can supply me with the main roller bearings and 
> > seals only. Would anybody have the reproduction (Timken, SFK, say) codes 
> > 
> > 
> > for the needle bearings? The OEM numbers are 666927 and 1949834. I need 
> > also 2124607 and 1635282. Does any firm produce a gasket set for an 
> > A903?
> > 
> > Pekka Pere
> > 1965 Valiant
> > 1964 Fury
> > Finland


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.