Re: Disc brakes.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Disc brakes.



Do you think you might have a power master cylinder as opposed to a
manual one? I think it makes a difference. That would explain the
increased effort.

Bill M
65 Coronet 500 'vert


On 4/12/07, William Cole <wedge64@xxxxxxxxxxx> wrote:

My car came with the disc brake swap, done by the guy I bought it from I
guess. I put new pads, rotors and calipers on the car as well as good
semi-metallic shoes in the rear. I used, and I'm not completely sure on
this, a master cylinder from a disc brake Mopar car, (not sure at this
point, which one), and a prop valve I had lying around. Don't understand
why it the car doesn't stop any better than it does. Have to use a lot
of leg pressure to get her stopped. The calipers ended up in the front
of the rotor, and I'm not sure that's the best place for it, so that may
have something to do with the stopping power. I bled the crap out of the
system so I don't think I have any air in the system. Pedal is firm but
the brakes just don't work like I thought they would.

Bill
On Wed, 11 Apr 2007 15:18:36 +0000, MrChristopher1@xxxxxxxxxxx said:
>
> William, please expand a little more.  You are the first person I have
> heard that is NOT satisfied with the drum to disk swap.  I am in the
> process of doing this and am curious / concerned.  I appreciate any
> input.  What M/C did you use?  Proportioning valve?
> Christopher
>
> '64 Dodge 440 2 Dr. Hard Top
> '87 Dodge Ramcharger
> '00 Merc Berz C230 Kompressor 16.73 1/4 - (Hey, It's DaimlerChrysler)
>
>
>  -------------- Original message ----------------------
> From: William Cole <wedge64@xxxxxxxxxxx>
> >
> > I have the same disc brake system on my 64 Max Wedge Sport Fury and they
> > don't stop worth a damn. All new pads in front and good Semi-Metellic in
> > the rear. I hate these brakes. I have to use a lot of pressure to get
> > this car stopped easily. I do have manual brakes and have done away with
> > the power brake system.
> > I'm thinking of this summer changing to ALL 4 wheel disc brakes from
> > Master Power or Engineered Componets I see advertised in Mopar
> > Collectors Guide. Only difference I can see in price is with MP you get
> > new spindles. It's scary sometimes if you have to make an emergency stop
> > with the setup I have now.
>
> --
>
>
> ----
> Please address private mail -- mail of interest to only one person --
> directly to that person.  I.e., send parts/car transactions and
> negotiations as well as other personal messages only to the intended
> recipient, not to the Clubhouse public address. This practice will
> protect your privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
--
  William Cole
  wedge64@xxxxxxxxxxx

--
http://www.fastmail.fm - A fast, anti-spam email service.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.





Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.