Re: Rear speaker grill for a '64 Plymouth
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Rear speaker grill for a '64 Plymouth



Doug,  My Dodge had the center speaker grill.  It is made of metal and is about the size of a 6x9 speaker of today.  I believe it to be stock.  The rear shelf had a hole cut in the hardboard, but a good inch smaller then the grill all the way around.  Do you need or want this grill?  Contact me off list if so.
Thanks, Christopher

'64 Dodge 440 2 Dr. Hard Top
'87 Dodge Ramcharger
'00 Merc Berz C230 Kompressor 16.73 1/4 - (Hey, It's DaimlerChrysler)

--

 -------------- Original message ----------------------
From: Douglas Sutherland <pluckedchickens@xxxxxxxxxxx>
> 
> I saw a mostly original '64 Plymouth, 2 door hardtop recently that had a 
> metal or plastic speaker grill in the rear shelf.  Is that stock?
> 
> For those of you with similar cars, with the original back shelf intact -- 
> what does your rear speaker grill look like?
> 
> Is it holes cut into the hardboard shelf or do you have a separate grill 
> piece mounted on the shelf?
> 
> Thanks,
> Doug


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.