Re: Damn Starter snapped!

[Dodger7998@xxxxxxx]

I just installed a late model dakota starter on my test stand  engine, it has 
a 63 361 tranny case mounted to the 440(shouldn't matter on the  engine, it 
bolts to the tranny, not the engine) and had no problems,,,,,,,there  is a 
indentation in the bell housing that the nose of the starter fits into, if  it is 
not started into it properly,  it will cause the starter to break if  
tightened down, the starter should be able to be placed in the proper position  by 
hand, and not have to be forced to go tight to the  bellhousing



************************************** See what's free at http://www.aol.com.

[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.