Re: Disc Conversion...just that easy?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Disc Conversion...just that easy?



I went w/ Rick E from Mopar Action yrs. ago. I used
Volare spindles.Cordoba pin calipers,etc. No need to
change control arms.I used my originals.
--- Bill <Y1TopBanana73@xxxxxxxxx> wrote:

> According to Moparts.com (
> http://www.moparts.com/Tech/tech/pages/b-ebody.html
> ) all you have to
> do suspension wise to convert a 62-65 B-Body from
> drum to discs is
> change the spindle to a later disc B-Body, then do
> the master
> cylinder, proportioning valve, etc. You don't need
> to change any
> control arms. Is this correct?
> 
> Bill M
> 65 Coronet 500 'vert
> 


George



       
____________________________________________________________________________________
Pinpoint customers who are looking for what you sell. 
http://searchmarketing.yahoo.com/


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.