Rear tapered axles/ brakes

[bschleic57@xxxxxxx]

My 63 Fury has a leaking LR wheel cylinder.? I have them on the shelf new and the lines are replaced with SS, so I pull off the wheel, attach my trusty (rusty) wheel puller and whack away on the turn piece.? it tightens up but drum is still firmly attached.? a little heat.? nothing. plenty of PB Blaster nothing.? 

Yes i remembered to back off the self adjusters.? The nut was on plenty tight, maybe someone used an air wrench and not torque wrench.

Any thoughts, wisdom or condolences?

WHS
________________________________________________________________________
AOL now offers free email to everyone.  Find out more about what's free from AOL at AOL.com.

[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.