RE: Gas Tank Help

["Gary H." <62to65mopar@xxxxxxxxxxx>]

He's referring to Frank Mitchell, aka Mitchell Motors.

Atlas has a phone # listed on the Vendor's page:
http://1962to1965mopar.ornocar.com/restore2003.html

I thought the 64-65 used a different seal but the 62-63 used an O ring? 

Also, if anyone has the correct size for the O ring please post it. I'll 
put that size reference on the 62-65 Tech page.

Thanks,
Gary H. 


Nick Tiberio wrote:
> 
> Tom,
> 
> Who's Frank? I'll try to find a website for Atlas. 
> 
> Tom Duross wrote:
> > 
> > I know Frank has them but I got one from Atlas in CA, it's aftermarket 
> > but
> > it stopped my leak.
> > Tom
> > when's that NH show?
> > 
> > Subject: Gas Tank Help
> > 
> > I have a replacement gas tank in my '63 Sport Fury. The filler tube
> > rubber gromet/seal is almost broken in two. It appears to have been
> > installed improperly and maybe the wrong size. The filler tube is
> > original and measures 2" diameter. The gas tank opening is 2 1/4".
> > 
> > HELP were do I find one of these. It appeears to be different than the
> > O-Ring in my '63 Fury with the original tank. ...


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.