Re: 1962 filler tube O ring (was RE: Gas Tank Help Fixed)

[Dave Casey <dcasey@xxxxxxxxxxxxx>]

Furthermore, could any one of you kind souls with an MPC tell me if the '65 
Dodge C-body filler neck seal is the same? Thanks!

Dave Casey

----- Original Message ----- 
From: "Gary H." <62to65mopar@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Sunday, August 26, 2007 6:46 PM
Subject: 1962 filler tube O ring (was RE: Gas Tank Help Fixed)


> Thanks Nick for the good news.
>
> So, the  only year not covered is 1962. Does anyone know the O ring
> specs for a filler neck on a 1962 B Body?
>
> Thanks,
> Gary H.
>
> Nick Tiberio wrote:
> ...> Gary, here's your info. For replacement gas tanks with a 2 1/4"
> opening,
> > and a filler tube with a 2" diameter you may use the following;
> >
> > Penstar Reproductions: 63-69B  67-74A  71-74B Filler Tube Grommet All
> > Models $16.00...
>
>
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.