RE: Max Wedge Manifold Vaporization

[Brian Schlump <jsbs@xxxxxxxxxxxxx>]

Nick,
Kramer sells a thick carb gasket that will help insulate the carb from 
the heat in the manifold...Brian

Nick Tiberio wrote:
> 
> I see that my carbs are mounted to the manifold with only paper thin 
> gaskets. Would a spacer or other gasket combo reduce heat to the carbs 
> further reducing my vaporization problem.
> 
> I notice that raising the carbs will cause air cleaner clearance 
> problems. My hood has the full frame, with insulation. The insulation 
> retaining clip is hitting the left front corner of the left air cleaner. 
> 
> Looks like I'll be cutting the hood frame. I'm open to remarks from 
> anyone who's been this route.
> 
> Nick Tiberio
> furyus63



'64 Belvedere
Davenport, Iowa

"The difference between ordinary and extraordinary is that little 
extra."


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.