Cup adjusters on stainless rockers

[Derrick Brown <63max426@xxxxxxxxx>]

hi all,

im researching a question about rocker adjusters.
Ive got a set of stainless rockers with the "cup style" adjuster tip.

the rockers have no oil orifice on the underside to squirt oil at the  
tip of the pushrod where it meets the adjuster.
My question is, these adjusters have a hole from the center of the  
cup that extends all the way up thru the top surface of the adjuster  
where your adjuster wrench (allen wrench) would go.

so does oil only get splashed down thru from the top to this opening  
making its way down as a drip to the tip of the pushrod ?
is that enough under running conditions?

or does simple oil splash from the underside of the valvetrain  
suffice to keep the tip of the pushrod oiled?

any experiences out there?

Derrick Brown
'63 Sport Fury, 4 speed
derrickb@xxxxxxx




--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.