RE: Progress and speedo gears
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Progress and speedo gears



http://home.earthlink.net/~mopared/speedo.htm will give you the number 
Rich.

Richard Kinsley wrote:
> 
> 
> 
> Rich Kinsley  '64 Polara 4 dr 318poly w/goodies
> 
> I'm a step closer to the big Paul vs Rich showdown. Would it help if I 
> wear a black ski mask with a big X on it and growl alot? :) I think I'll 
> 
> need help against his 440.
> 
> I do have the springs, shocks, driveshaft and rear end installed. The E 
> brake ends are a tad different and maybe a bit shorter so I have to 
> tweak it a bit. I put on my new wheels and tires and took it off the 
> jack stands to check it's stance. It looks awesome. The rear is a tad 
> high maybe but after I run it around a bit I think it will settle in and 
> 
> go down a bit. It isn't more than an inch higher anyway.
> 
> Here's my question, what speedo gear do I need in the trans? It's a 3:91 
> 
> gear with 26.8" dia tires. Of course the trans is a 727. 



Jeff Adams
64 Polara


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.